Description
|
Alloy Shank Hoist Hooks |
|
• Heat treated alloy steel provides strength without bulk or weight
• Pre-drilled boss allows for addition of a latch (order separately).
• Hardness approximately R30c-36c
• Shank hooks are supplied unthreaded. Insufficient thread engagement can result in loss of load.
The following must be observed:
1) Shanks are not intended for internal threading or swaging.
2) To obtain maximum strength threads to be class 2 or better.
3) Thread engagement in nut or object must not be less than one thread diameter.
Dimensions in inches
|
Item No. |
WLL. Tons |
Max
Shank
after
machin-
ing
|
Min. thread size (UNC) |
D |
F |
G |
H |
J |
K |
L |
O |
P |
R |
T |
X |
Y |
Z |
Wt/Ea
lbs
|
|
9-050 |
1 |
.53 |
1/2-13 |
3.06 |
1.25 |
.87 |
1.05 |
.93 |
.63 |
5.28 |
.93 |
2.12 |
2.35 |
.87 |
.59 |
2.06 |
.69 |
.63 |
|
9-051 |
1.5 |
.62 |
5/8-11 |
3.33 |
1.38 |
.94 |
1.11 |
.97 |
.71 |
5.78 |
.97 |
2.27 |
2.59 |
.97 |
.66 |
2.25 |
.78 |
.85 |
|
9-052 |
2 |
.66 |
5/8-11 |
3.67 |
1.50 |
1.06 |
1.21 |
1.06 |
.88 |
6.29 |
1.06 |
2.54 |
2.75 |
1.03 |
.72 |
2.50 |
1.00 |
1.38 |
|
9-053 |
3 |
.81 |
3/4-10 |
4.20 |
1.63 |
1.27 |
1.43 |
1.19 |
.94 |
7.26 |
1.16 |
2.80 |
3.16 |
1.16 |
.88 |
2.84 |
1.00 |
1.92 |
|
9-055 |
5 |
1.03 |
7/8-9 |
5.11 |
2.00 |
1.44 |
1.63 |
1.50 |
1.31 |
8.63 |
1.41 |
3.47 |
3.85 |
1.53 |
1.16 |
3.34 |
1.25 |
4.02 |
|
9-057 |
7 |
1.27 |
1-1/8-7 |
6.24 |
2.50 |
1.82 |
2.01 |
1.78 |
1.68 |
10.43 |
1.69 |
4.59 |
4.77 |
1.94 |
1.41 |
3.84 |
1.56 |
7.25 |
